Bending machine used by the wire on the coil power, power after the pressure plate on the gravitational force, in order to achieve the pressure plate and the base between the plate clamping, so as to meet the needs of a variety of parts. Only the cooperation between the components in order to make it better work. Then talk about the different parts of the bending machine works:
1, the synchronization system: the machine by the torsion axis, swing arm, joint bearings and other mechanical synchronization mechanism, simple structure, stable and reliable performance, high precision synchronization. The mechanical stop is controlled by the motor, the numerical control system controls the numerical value.
2, the slider part: the use of hydraulic transmission, slider part of the slider, cylinder and mechanical block fine structure. The left and right cylinders of the bending machine are fixed on the frame, and the piston (rod) is driven by the hydraulic pressure to move the slider up and down. The mechanical stop is controlled by the numerical control system.
3, the ball body: bending machine block material using motor drive, driven by chain drive two screw synchronous movement, CNC system control block size.
4, the table part: by the button box manipulation, so that the bending machine to drive the block before and after the move, by the NC system to control the distance traveled, the minimum reading of 0.01 mm (front and rear position are limit switch limit).
The various parts of the bending machine to improve the efficiency of the system, precision, maintainability, versatility and safety, reducing the manufacturing materials, it is very convenient to use.