Home > News > Content

Operation Method Of CNC Bending Machine

1, first is plugged in and the switch in the Control Panel, and then start the pump, so you hear the pump turn the sound up. (When the machine is not)

2, stroke adjustment, must be used to adjust stroke, in front of the bend must be tested. Punch it down to a thickness of the bottom must be guaranteed when there is a gap. Otherwise it will cause damage to tooling machines. Stroke rapid adjustment adjustment is electric.

3, bend the slot option to choose the thickness of 8 times the width of the notch. Bending 4mm sheet, choose about 32 slot. 

4, backgauge adjustment generally have the power to quickly adjust and manual fine tuning methods with the shears.

5, step on the foot pedal start bending, CNC press brake tooling is different from shearing machine, ready to release, loosen the foot to stop, step on the continued downward.